Panel Sizing Wood and Standard Plastic Saws Model PS2Z
Raptor Systems
Your Machinery Experts and High Engineering Solutions Company!
Raptor Systems ++1-780-438-6188
The Mayer PS2Z panel cutting saw will give you the highest output, the best dimensional accuracy, coupled with a superior quality cut.
This machine guarantees:
Dimensionally accurate finish cuts over many years with a wear free ground and hardened cylindrical guide for the saw and the material pushing system.
Maximum dimensional stability with dimensions taken by separate precision measurement racks operating independently of the drive system.
High dividing output due to the high traversing speed and automatic feeding by means of the lifting table.
Short cutting cycles because of an optimized saw movement and pressure beam opening.
This machine guarantees:
Dimensionally accurate finish cuts over many years with a wear free ground and hardened cylindrical guide for the saw and the material pushing system.
Maximum dimensional stability with dimensions taken by separate precision measurement racks operating independently of the drive system.
High dividing output due to the high traversing speed and automatic feeding by means of the lifting table.
Short cutting cycles because of an optimized saw movement and pressure beam opening.
Wood Saws Single-Axis
Veneer Saws
Multi-Axis Saws
Technical Data:
Cutting length: 3200/3800/4200/5800 mm
Material pusher capacity: 3200/3800/4200/5800 mm
Saw blade projection: 115 mm
Main saw motor: 18 kW/50 Hz or 21 kW/60 Hz
Scoring saw motor: 2.2 kW
Main saw blade diameter: 450 mm
Scoring saw blade diameter: 150 mm
Saw carriage forward speed: 5-100 m/min
Saw carriage return speed: 130 m/min
Material pusher forward speed: 25 m/min
Material pusher return speed: 80 m/min
Cutting length: 3200/3800/4200/5800 mm
Material pusher capacity: 3200/3800/4200/5800 mm
Saw blade projection: 115 mm
Main saw motor: 18 kW/50 Hz or 21 kW/60 Hz
Scoring saw motor: 2.2 kW
Main saw blade diameter: 450 mm
Scoring saw blade diameter: 150 mm
Saw carriage forward speed: 5-100 m/min
Saw carriage return speed: 130 m/min
Material pusher forward speed: 25 m/min
Material pusher return speed: 80 m/min
Long execution, therefore making it possible to push parts up to 300 mm beyond the cutting line for additional safey.
Each clamp has two pressure fingers. This guarantees positive clamping of very narrow strips.
The machine has a powered infeed conveyor for rear loading of material. Also, the machine has electronically controlled pushers for the lifting table. Thin and/or corrugated panels can be loaded without problems, since the pusher units are controlled independently of each other.